Metal Seated Trunnion Ball Valve
With such features as small fluid resistance, smooth flow channel, rapid opening and closing ,and easy automatic control, the ball valve has been widely used. But the seat of regular ball valve is generally made of PTFE and other nonmetal materials. Limited by seat seal materials, the regular valves cannot be
With such features as small fluid resistance, smooth flow channel, rapid opening and closing ,and easy automatic control, the ball valve has been widely used. But the seat of regular ball valve is generally made of PTFE and other nonmetal materials. Limited by seat seal materials, the regular valves cannot be used under the service condition of high temperature. Therefore ,the use of regular ball valve is limited to a certain degree. The series of new style practical metal seated ball valve products are newly designed to solve the above problem, and have been widely applied in petroleum, chemical industry, electric power, metallurgy, light industry and etc.
1. Advanced Ball And Seat Hardening TechnologyThe ball and seat of the metal seated ball valve absolutely adopts the sealing mode of metal to metal. According to different service conditions and requirements of users, various advanced ball and seat hardening technologies can be adopted, including HVOF coating, nickel-base alloy spray
welding,high nickel alloy spray welding, cobalt-base hard alloy spray welding, etc. generally, the ball and seat surface hardness can reach HRC55~60 with the maximum value of HRC70.Generally,the heat resistance of the sealing face material can reach 540℃ with the maximum value of 980 ℃ 。 The sealing face material has also good, wear resistant and impact resistant performances.
2. Flexible Valve Opening And ClosingUnder the service condition of high temperature, the ball and seat will expand too much because of thermal expansion, and the thus causing that the valve cannot be opened. The ball valve adopts the disc spring or spring loaded sealing structure so that thermal expansion of parts under high temperature can
be absorbed by the disc spring or spring, and it is ensured that the valve will be flexibly opened and closed under high temperature without expanding too much under high temperature.
3. Fireproof Structure DesignIn the metal to metal sealing structure for the valve, the gasket is the stainless steel +flexible graphite and the packing is the flexible graphite. Therefore, reliable sealing of the valve can be ensured even in case of fire.
4. Double Block And Bleed(Metal seated trunnion ball valve)The metal seated trunnion ball valve usually adopts the sealing structure before the ball. When the valve is closed and the middle cavity is emptied through the discharge valve. The metal seated floating ball valve usually adopts the sealing structure after the ball. Unidirectional sealing is generally adopted with flow direction marked on the body. If users have special requirements, bidirectional sealing structure can be adopted.
5. Reliable Sealing PerformanceThe unique ball grinding technology is adopted. Through rotation of the ball and the grinder at different positions, the ball surface will achieve high roundness and fineness. The low pressure sealing of valve seat is realized by spring pre-tightening. In addition, the piston effect of valve seat is designed reasonably, which realizes high pressure sealing by the pressure of the medium itself. The sealing level of the valve meets the requirement of level IV in ANSI B16.104.
The metal seated ball valve is used to cut off or connect the media in various pipelines. It is suitable for severe service conditions containing solid granules, slurry, coal powder, cinder and etc.